New Page 1

The Uniclic profile has been designed so that during installation the laminate flooring panels can be slotted together either angled or horizontally and without damage. This is very important in areas where angling is either difficult or impossible (under door frames or radiators, for example).

The ingenious UNICLIC-system has a special shape of tongue and groove. Their sophisticated and very accurate milled shape makes it possible to create a very tight connection during the installation.

You can use two simple techniques to make a UNICLIC connection.

Constant tension
As soon as the panels are clicked together they are under constant tension. This is created by the underside of the groove pressing lightly on the tongue. In this way the panels push together and stay nicely pressed together. No play or open joints. No risk of accumulating dirt, or worse, damage to the panels.

Extra strong binding (+450 kg/lm)
A floor lives. The panels expand or contract, resulting in constant stresses being exerted between them. However, Uniclic connections resist a tensile force in excess of 450 kg per longitudinal meter, both along the length and above all along the end. So invite your family and friends.

Easy to dismantle
The right degree of tensile strength, pre-stressing and the fact that the panels can simply be lifted out from each other, mean that they can be very easily taken apart again. A damaged panel? With Uniclic it can just be replaced. Redecorating a room? Or planning to move? With Uniclic the floor can be very easily reused.

Super fast installation:
just click the panels together and that's it

Tidy work:
no messing around with glue and no glue residue

Start wherever you want:
you can start in any corner of the room, it makes no difference at all

Work in any direction:
from left to right, or vice versa, ideal for left-handed people

High moisture-resistance:
the laminate has a special extra watertight core, which improves the floor's moisture-resistant properties